LUPS-1 - Miniature ultrasonic liquid level switch

• One trigger point.
• Made of stainless steel.
• Powered by 4-20 mA current loop or Namur standard
• Output signals: 4-20 mA, Namur
• Setting parameters with a magnetic pencil.
• The density of the working liquids is 300 ÷ 2000 kg / m3.
• The temperature range of liquids is -70°C ÷ + 150°C.
• Working pressure is up to 450 atm.
• Explosion protection mark 1 Ex d IIC T6 Gb X.
• Degree of protection IP67.
• Ambient temperature -55°С ÷ + 60°С.

LUPS-8 - Multi points Ultrasonic liquid level switch

• The number of trigger points - 1 ÷ 8.
• Made of stainless steel.
• Power options 24V, current loop 4-20mA, Namur
• Output signals: 4-20 mA, dry contact, Namur
• Setting parameters with a magnetic pencil.
• Sticking control.
• The temperature range of liquids is -196°С ÷ + 500°С.
• Pressure up to 450 atm.
• Explosion protection mark 1 Ex d IIC T6 Gb X.
• Degree of protection IP67.
• Ambient temperature -55°С ÷ +60°С.

Induction heater

• It is used for local heating of the check valve of the fountain.
• Based on the resonant effect with an efficiency> 95% and close to 1 cosφ.
• Explosion protection mark 1 Ex mb [ia IIC Ga] IIC T4 Gb X.
• Degree of protection IP66.
• Rated power 150W.
• Supply voltage 230 V (+-10%).
• Ambient temperature -60°С ÷ +40°С
• Protective functions: overvoltage, current, over temperature, resonance change.
• Alarm signaling (dry contact).

resistive heater

• Modular explosion-proof resistance heater of increased strength.
• Case material - aluminum.
• Coating - black heat-resistant enamel.
• The dielectric strength is not less than 2500 V.
• Explosion protection mark 1 Ex d IIC T4 Gb X.
• Degree of protection IP67.
• Power 400 W ÷ 4800 W (corresponds to version).
• Supply voltage: 1 phase 230 V (+-10%) or 3 phases 400 V (+-10%).
• Built-in digital surface temperature sensor.

temperature regulator with SSD

• 9 options.
• Rugged die-cast aluminum alloy housing. Covering heat-resistant enamel of gray color.
• It does not interfere. Load switching at zero sinusoidal voltage.
• It controls the temperature of the medium, the temperature of the heater and the temperature of its own heating.
• 2 analog current outputs 4-20 mA.
• 2 alarm relays of critical temperature.
• Plug-in temperature sensors: analog PT100 or digital DS1820.
• The range of controlled temperature is -200°С ÷ + 600°С. (with DS1820 sensors -55°С ÷ +125°С).
• Explosion protection mark 1 Ex d llC T6 Gb X.
• Connection box not required. Connections are made inside the instrument case.
• Degree of protection IP67.
• Power load 5 kW.
• Supply voltage 230 V (+-10%).

temperature regulator with electromechanical relay

• Three operating modes: heating, cooling, data collection from 25 digital temperature sensors at a distance of 200 meters.
• Power of the connected load is 5 kW.
• Supply voltage 230 V (+-10%).
• Integrated LED display.
• Setting parameters in the hazardous area with a magnetic pencil.
• Rugged die-cast aluminum alloy housing. Covering: heat-resistant enamel of gray color.
• No junction box required. Connections are made inside the instrument case.
• Alarm relay of critical temperature.
• Standard MODBUS RTU output interface for communication with IIoT and SCADA.
• Explosion protection mark 1 Ex d [ia IIC Ga] IIB T6 Gb X.
• Controlled temperature range -55°С ÷ +125°С.
• Ambient temperature -60°С ÷ +50°С
• Degree of protection IP68.

LED lamp

• Power 15 watts.
• Luminous flux 1650 Lm.
• Supply voltage 230 V (+-10%).
• Arbitrary space orientation.
• Rugged die-cast aluminum alloy housing. Covering: heat-resistant enamel of gray color.
• The material of the diffuser is a transparent polyurethane compound reinforced with a steel mesh.
• Explosion protection mark 1 Ex sb llC T6 Gb X.
• Degree of protection IP66.
• Ambient temperature -55°С ÷ +40°С.